§ 50101. Buying goods produced in the United States  


Latest version.
  • (a)Preference.—The Secretary of Transportation may obligate an amount that may be appropriated to carry out section 106(k), 44502(a)(2), or 44509, subchapter I of chapter 471 (except section 47127), or chapter 481 (except sections 48102(e), 48106, 48107, and 48110) of this title for a project only if steel and manufactured goods used in the project are produced in the United States. (b)Waiver.—The Secretary may waive subsection (a) of this section if the Secretary finds that—(1) applying subsection (a) would be inconsistent with the public interest;(2) the steel and goods produced in the United States are not produced in a sufficient and reasonably available amount or are not of a satisfactory quality;(3) when procuring a facility or equipment under section 44502(a)(2) or 44509, subchapter I of chapter 471 (except section 47127), or chapter 481 (except sections 48102(e), 48106, 48107, and 48110) of this title—(A) the cost of components and subcomponents produced in the United States is more than 60 percent of the cost of all components of the facility or equipment; and(B) final assembly of the facility or equipment has occurred in the United States; or(4) including domestic material will increase the cost of the overall project by more than 25 percent. (c)Labor Costs.—In this section, labor costs involved in final assembly are not included in calculating the cost of components.
(Pub. L. 103–272, § 1(e), July 5, 1994, 108 Stat. 1298, § 49101; renumbered § 50101 and amended Pub. L. 104–287, § 5(88)(D), (89), Oct. 11, 1996, 110 Stat. 3398.)

Historical And Revision

Historical and Revision Notes

Pub. L. 103–272

Revised

Section

Source (U.S. Code)

Source (Statutes at Large)

49101(a)

49 App.:2226a(a).

Nov. 5, 1990, Pub. L. 101–508, § 9129, 104 Stat. 1388–371.

49101(b)

49 App.:2226a(b).

49101(c)

49 App.:2226a(c).

In this chapter, the word “goods” is substituted for “product” and “products” for consistency.

In subsection (a), the words “Notwithstanding any other provision of law” are omitted as surplus. The words “after November 5, 1990” are omitted as obsolete.

In subsection (b), before clause (1), the words “The Secretary may waive” are substituted for “shall not apply” for consistency. In clause (2), the words “steel and goods” are substituted for “materials and products” for consistency. In clause (4), the word “contract” is omitted as surplus.

Pub. L. 104–287, § 5(89)

This makes a clarifying amendment to 49:50101(a) and (b)(3), 50102, 50104(b)(1), and 50105, as redesignated by clause (88)(D) of this section, because 49:47106(d) was struck by section 108(1) of the Federal Aviation Administration Authorization Act of 1994 (Public Law 103–305, 108 Stat. 1573).

Amendments

Amendments

1996—Pub. L. 104–287, § 5(88)(D), renumbered section 49101 of this title as this section.

Subsecs. (a), (b)(3). Pub. L. 104–287, § 5(89), substituted “section 47127” for “sections 47106(d) and 47127”.

Miscellaneous

Use of Domestic Products

Pub. L. 103–305, title III, § 305, Aug. 23, 1994, 108 Stat. 1592, provided that:“(a)Prohibition Against Fraudulent Use of ‘Made in America’ Labels.—(1) A person shall not intentionally affix a label bearing the inscription of ‘Made in America’, or any inscription with that meaning, to any product sold in or shipped to the United States, if that product is not a domestic product.“(2) A person who violates paragraph (1) shall not be eligible for any contract for a procurement carried out with amounts authorized under this title [enacting section 47509 of this title, amending sections 44505 and 48102 of this title, and enacting provisions set out as notes under this section and section 40101 of this title], including any subcontract under such a contract pursuant to the debarment, suspension, and ineligibility procedures in subpart 9.4 of chapter 1 of title 48, Code of Federal Regulations, or any successor procedures thereto.“(b)Compliance With Buy American Act.—(1) Except as provided in paragraph (2), the head of each office within the Federal Aviation Administration that conducts procurements shall ensure that such procurements are conducted in compliance with sections 2 through 4 of the Act of March 3, 1933 ([former] 41 U.S.C. 10a through 10c, popularly known as the ‘Buy American Act’ [see 41 U.S.C. 8301 et seq.]).“(2) This subsection shall apply only to procurements made for which—“(A) amounts are authorized by this title to be made available; and“(B) solicitations for bids are issued after the date of the enactment of this Act [Aug. 23, 1994].“(3) The Secretary, before January 1, 1995, shall report to the Congress on procurements covered under this subsection of products that are not domestic products.“(c)Definitions.—For the purposes of this section, the term ‘domestic product’ means a product—“(1) that is manufactured or produced in the United States; and“(2) at least 50 percent of the cost of the articles, materials, or supplies of which are mined, produced, or manufactured in the United States.”

Similar provisions were contained in the following prior authorization act: Pub. L. 102–581, title III, § 305, Oct. 31, 1992, 106 Stat. 4896.

Purchase of American Made Equipment and Products

Pub. L. 103–305, title III, § 306, Aug. 23, 1994, 108 Stat. 1593, provided that:“(a)Sense of Congress.—It is the sense of Congress that any recipient of a grant under this title [enacting section 47509 of this title, amending sections 44505 and 48102 of this title, and enacting provisions set out as notes under this section and section 40101 of this title], or under any amendment made by this title, should purchase, when available and cost-effective, American made equipment and products when expending grant monies.“(b)Notice to Recipients of Assistance.—In allocating grants under this title, or under any amendment made by this title, the Secretary shall provide to each recipient a notice describing the statement made in subsection (a) by the Congress.”